Electroshock device AIR «M-140»

You are here: Main page → Products and solutions → Non-lethal electroshock weapons for citizens → Electroshock device AIR «M-140»

AIR «M-140» is effective both in shooting or contact modes.

AIR «M-140» is used in a remote mode with a cartridge «UTED» (type 01) to aim a target at the distance up to 4.5 meters. Great accuracy in firing (shooting with angle 0,5°). 10 cm between probes is maximum. Easy to get even a moving target.

Features:

Integrated laser sight and LED light used for target acquisition;
Dataport: power and time indicator; stores time and date of firing;
Demountable rechargeable Li-Pol accumulator (the charger in a set).
The base model: voltage 70÷90 000 V, power 2÷3 W

The stun gun AIR «M-140»

Model	Color	Power Source	Label color
AIR «M-140»	Black	Li-Pol	Blue
Specifications		Features
Output specifications^1-2 • Wave form: monopolar pulse. • Pulse duration: 60÷70 µs. • Peak loaded voltage: 1700÷2500 V. • Energy per pulse: 42 mJ. • Power rating delivered into load: 2÷3 Watts.³ Temperature range: Li-Pol cells: -15ºC to 50ºC Relative humidity: up to 98% Power source: demountable Li-Pol accumulator. Housing: high impact polymer. Cartridge available up to a maximum range of 4.5 meters. The average accuracy in shooting consists 5÷10 cm between probes. Patent: Russia 2156940 and others.		Integrated laser sight and LED light (used for target acquisition). Capable of drive-stun with worked out cartridge⁴ or without a cartridge installed. Dataport: integrated charge level LED power indicator, time; stores date and time of firing. Electrical charge can penetrate up to 3,5 cm cumulative of clothing or 2,5 cm per probe. Warranty: 1 year standard with extended warranties available⁵. Fully charged battery provides not less than 150 firings. For Li-Pol cells a charger is available. Compatible with all MARCH GROUP cartridges.
Physical Characteristics (Dimensions without cartridge)
Length (L)	Height (H)	Width (W)	Weight
154±2 mm	42±2 mm	114±1 mm	250±30 g

¹ Output specifications may vary depending on temperature, battery charge, and load characteristics.
² Output specifications derived from 1000 Ω (Ohms) resistive load measurements.
³ For non-military weapon.
⁴ Cartridge is current-conducting, there is no need to put it off after shooting for drive-stun impact. Use of cartridge not authorized by March Group will void the product warranty.
⁵ Additional terms and conditions may apply.

Manual