Electroshock baton «Malvina-250-A»

You are here: Main page → Products and solutions → Non-lethal electroshock weapons for citizens → Electroshock baton «Malvina-250-A»

The electroshock baton «Malvina-250-A» is made of lightweight and high-impact fiberglass. The device superficially resembles fold umbrella and goes unnoticed.

Unique «March Group» technology consists in small distance between probes during the shooting. You will not overshoot!

Specifications

Specifications		Features
Output specifications^1-2 • Wave form: monopolar pulse. • Peak open circuit arcing voltage: 70 000÷120 000 V. • Power rating delivered into load: 3÷10 Watts.³ Temperature range: Ni-MH cells: -15ºC to 50ºC Relative humidity: up to 98% Power source: Ni-MH accumulator. Housing: high impact fiberglass. Cartridge available up to a maximum range of 4.5 meters. The average accuracy in shooting consists 5÷10 cm between probes.		Capable of drive-stun with worked out cartridge⁴ or without a cartridge installed. Electrical charge can penetrate up to 3,5 cm cumulative of clothing or 2,5 cm per probe. Warranty: 1 year standard with extended warranties available⁵. Fully charged battery provides not less than 200 firings. For Ni-MH cells a charger is available. Compatible with all MARCH GROUP cartridges.
Physical Characteristics (Dimensions without cartridge)
Length (L)	Diameter (D)	Weight
260±2 mm	40±1 mm	280±20 g

¹ Output specifications may vary depending on temperature, battery charge, and load characteristics.
² Output specifications derived from 1000 Ω (Ohms) resistive load measurements.
³ For non-military weapon.
⁴ Cartridge is current-conducting, there is no need to put it off after shooting for drive-stun impact. Use of cartridge not authorized by March Group will void the product warranty.
⁵ Additional terms and conditions may apply.

Manual